|
Functional
characteristics
- Satellite vehicle monitoring by GPS
- Reporting of vehicle statuses: ignition, stop, engine RPM, fuel
level, vehicle accumulator voltage level, door opened/closed,
vehicle 'built-in' alarm indications, excessive speed
- Configurable intelligent algorithm for GPS data transfer
- Instant data transfer on vehicle position and status on user
request
- Vehicle monitoring within or outside defined regions or routes
(Geo-fencing)
- History mode (data logging)
- Configurable access and reporting level
- Two Power Save modes, with vehicle accumulator protection when
voltage is lower than 11 V
- Possibility of connection with external alarm system
- Engine/ignition blocking with remote command (SMS or GPRS)
- Separate setting of sending parameters for data transfer in local
and roaming networks
- Automatic choice of most competitive accessible GSM roaming
networks
- Navigation option by external PC, Laptop or PDA
- Device parameters configuration via Serial port, GPRS and SMS
- Remote commanding and firmware change
TECHNICAL SPECIFICATIONS
• GSM/GPRS module Quad Band - GSM 850/900/1800/1900 MHz, GPRS Multislot Class
12
• GPS module SiRFstarIII
- Hot start < 1 s
- Cold start (open sky) < 38 s
- Tracking sensitivity -159 dBm
- Position/speed accuracy 5 m 2D RMS
• Power supply 11 V DC - 40 V DC,
over and under voltage protection
• Back up battery Li-Ion, 3.7V / 750
mAh
• Working temperature -20°C to +65°C
• Dimensions (WxDxH) 86 x 76 x 24 mm
• Weight 95 gr
• 7 multifunctional
inputs/outputs
- 2 digital outputs or
general-purpose digital inputs
- Analog input for fuel level
measurement in the tank or general purpose digital input
- Analog input for vehicle accumulator measuring and monitoring –
same as VCC pin
- Input for ignition detection
- External alarm device input or
general-purpose digital input
• Serial port
- Device parameters set up and
firmware update
- Data log read
- GPS data output for external device
(PC, PDA...)
• Low power consumption
- Average power consumption 50 mA
(@12VDC)
- Minimal power consumption 10 mA (@12VDC), in power save mode
- Vehicle accumulator protection (when accumulator voltage is < 11V,
power consumption is < 500uA)
|
